MHEDA Connection
facebook
July 15, 2015
Archive | MHEDA Home | Executive Dialogue | MHEDA Journal | Contact Us

Complete Storage Facelift

Print Print this Article | Send to Colleague

Performance Food Group (PFG) is one of the leading food service distributors in the US, delivering food and food related products to over 130,000 independent and national chain restaurants, schools and institutions. Their growing and extremely busy Little Rock, AR, facility faced major capacity and material handling challenges with no immediate plans for expansion.

Those challenges included:
Extensive Rack Damage – The distribution center had close to 3,000 pallet positions of damaged 2-deep, roll-formed drive-in rack. Confined in a small cooler with narrow aisles, the lower frame sections were severely bashed and bent due to constant forklift abuse. Despite several rack repair efforts, PFG was concerned that the system posed a safety hazard to their employees. They needed a stronger, abuse-resistant alternative.

The Need for Pick Faces for Cooler SKU’s – PFG faced a common foodservice challenge; how to effectively accommodate increasing SKU requirements. This was definitely the case with their cooler products category, where they needed to find several additional floor level pick faces within their existing footprint.

E-Distribution proposed a used, or like-new, Frazier 2-deep push-back system to replace the existing roll-formed drive-in. Knowing that budget and durability were top priorities, used structural push-back offered the ideal alternative; structural steel is far more abuse-resistant than roll-formed and capable of withstanding the extensive forklift abuse of a busy foodservice facility. Push-back also offers added productivity by delivering pallets directly to the aisle face vs. drive-in which requires the forklift to drive into the system to retrieve the 2nd pallet.

A creative and cost-effective solution was developed by PFG and the E-Distribution teams to add lower level pick faces. The floor level was already used for case-pick selection with reserve pallet storage above. E-Distribution added shelf beams and wire decking to create an extra single deep shelf level directly above the floor pick area for an addition 6-8 pick faces per bay.

The integration of like-new components saved PFG more than $150,000 versus a similar new structural push-back system.

It was critical that PFG’s distribution operations stay on track during implementation. Teardown and installation were completed one section at a time using an empty seasonal cooler area for transitional storage and order selection. Product was moved to transitional storage, rack dismantled and removed, floor repaired and push-back installed, all without disrupting day to day operations. New hardware was provided throughout the system.

PFG Little Rock is a great example of E-Distribution’s creative, customer driven approach to system design. This brand neutral, cost-saving solution allowed PFG to stay in their existing space with no interruption of operations during implementation.

Distributor: E-Distribution
Supplier: Frazier

Read more Sales Success Stories here.

To submit your own Sales Success Story for the 4Q 2015 issue, email sguglielmo@naylor.com
 

Share Share on Facebook Share on Twitter Share on LinkedIn

 
Material Handling Equipment Distributors Association
201 US Hwy 45, Vernon Hills, IL 60061-2398
Phone: 847.680.3500 FAX: 847.362.6989
connect@mheda.org
www.mheda.org
Submit News

Subscribe

©2020 MHEDA. All rights reserved,
The Contents of this publication may not be reproduced by any means, in whole or in part, without prior written consent of the publisher.